Desiccant Breathers – CV
Desiccant Breathers – CV
Desiccant Breathers – CV
The Desiccant Breathers – CVTM unit is a marked improvement over the customary dust caps or OEM breathers on equipment. When contaminated air enters the top of the breather, it passes through layered filter media, preventing solid particles from entering the breather and causing undue wear to your equipment surfaces. Filtered air passes through a bed of Desiccant Breathers – CVTM silica gel, which removes harmful moisture from the air. The silica beads also work to attract moisture from inside the equipment reservoir during service or shut-down, keeping the equipment dry. The addition of check-valves in our CV breather is ideal for low-flow and intermittent operations in high humidity conditions.
Product Breakdown
1. Center Tube
The center tube is constructed from rugged nylon material providing rigidity to the element and allowing for even airflow through the silica gel.
2. Secondary Filter Media
Second filter step prevents any possible migration of silica dust providing added system protection.
3. Oil Mist Collector
Polyurethane foam collects oil mist and distributes air evenly over filter media and moisture absorbing silica gel.
4. Moisture Absorbent
The PowerBreatherTM silica gel provides industry leading moisture removal and holds up to 40% of its weight.
5. ABS Outer Shell
Clear outer shell provides a visual indicator of silica gel condition allowing for optimum change out intervals.
6. Filter Media
3-micron absolute particulate filtration is provided by a polyester filter media.
7. Check-Valves
Check-valves provide protection in wash down areas. Check-valves isolate equipment from ambient conditions, prolonging life.
8. Sure-fit Connection
Use sure-fit connections instead of filler/breather cap. Adapters also available.
